Configuration and monitoring by way of detachable display front (PR 4512); process calibration and signal simulation.
Copying of the configuration from one device to others of the same type via the display front.
TC inputs can use either the internal CJC or a terminal with a built-in Pt100 sensor (PR 5910Ex, channel 1 / PR 5913Ex, channel 2) for higher accuracy.
Advanced monitoring of internal communication and stored data.
SIL 2 functionality is optional and must be activated in a menu point.
Applications
9113B can be mounted in the safe area or in zone 2 / Class 1, Division 2 and receive signals from zone 0, 1, 2 and zone 20, 21, 22 including mining / Class I/II/III, Division 1, Gr. A-G
Conversion and scaling of temperature (Pt, Ni and TC) and active current signals
The 9113B has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508
Technical Characteristics
1 green and 2 red front LEDs indicate operation status and malfunction
2.6 kVAC galvanic isolation between input, output, and supply
