PR 5106A HART Transparent Repeater
Ensure reliable signal transmission and full HART communication with the PR 5106A HART Transparent Repeater. Ideal for use in hazardous and industrial environments, it provides 3.75 kVAC galvanic isolation between input, output, and supply. Thus it safeguards your control systems from ground loops and electrical noise. With a fast response time, high accuracy, as well as flexible configuration, the 5106A is perfect for connecting 2-wire transmitters to SCADA or DCS systems. Whether you’re isolating signals, duplicating outputs, or maintaining HART diagnostics, this repeater delivers dependable performance in compact form.
- Full HART protocol transparency for advanced diagnostics and also device management
- High isolation (3.75 kVAC) to protect control systems in hazardous zones
- Flexible setup with active or passive output as well as multi-channel options
Product Documents
Description
The PR 5106A HART Transparent Repeater delivers robust signal isolation as well as uninterrupted 2‑way HART communication for 2‑wire transmitters in hazardous or industrial environments. It handles 3‑ or 5‑port configurations with 3.75 kVAC galvanic isolation between input, output, and also supply. The PR 5106A, from PR electronics, supports both 1‑ or 2‑channel versions, and offers universal supply via AC or DC. It primarily processes standard 4‑20 mA current signals, thus enabling the output to configure either as an active current transmitter or a 2‑wire transmitter.
- 3-port / 5-port 3.75 kVAC galvanic isolation
- Low response time
- 2-wire supply > 17 V; universal supply by AC or DC
- 1- or 2-channel version
PR 5106A HART Transparent Repeater
This HART Transparent Repeater boasts a fast response time (less than 25 ms for 0‑90% rise) and high accuracy (better than 0.1% of selected range), with strong EMC immunity as well as low noise influence. Furthermore, its floating input, output, and supply allow safe separation of potentially dangerous circuits. The PR 5106A mounts on a standard 35 mm DIN rail, vertically or horizontally; in addition, the slim form allows up to 84 channels per meter.
- Power supply and signal isolator with 2-way HART communication for 2-wire transmitters installation in hazardous areas.
- Signal isolator with 2-way HART communication for supplied current transmitters installation in the hazardous areas.
- Signal isolator with low response time on analog current signals.
Technical Characteristics
- PR5106A primarily processes current signals of 4-20 mA.
- PR5106A relies upon microprocessor technology for gain as well as offset. The analog signal transmits at a response time of less than 25 ms.
- Inputs, outputs, and supply are floating and also galvanically separated.
- The output can connect either as an active current transmitter or as a 2-wire transmitter.
Applications
- Using in hazardous areas to isolate and maintain safe HART communication with field transmitters.
- Repeating analog current signals without loss over large or noisy cable runs in oil, gas, chemical, as well as water/wastewater installations.
- Enabling signal duplication for monitoring and control in distributed control systems (DCS) or SCADA networks.
Brand
PR electronics
