Stafford, Texas

Flow Instrumentation Power Supplies, PiPS Series

SKU N/A Categories ,

Flow Instrumentation Power Supplies, PiPS Series


Available on backorder

Plug-in Power Supplies (PiPS) are intended for use with Bronkhorst pressure or mass flow meter and controllers. The PiPS Series is often combined with a BRIGHT flow readout and control module to offer an easy and affordable solution for powering stand-alone instrumentation.

  • Universal input 100 to 240 V AC
  • Output 15V/0.5A (maximal 7.5 W)
  • Interchangeable primary adapters
  • Constant voltage, current limited
  • Continuously short circuit proof


  • Power supply 100-240 Vac (50-60 Hz)
  • Interchangeable plugs (Euro, UK, USA, Australian, IEC) for mains connection
  • 9-pin D female, 8 DIN female, or RJ45 connector for instrument connection
  • Only applicable for instruments in digital mode
  • Maximum power consumption +15 Vdc, 500 mA
  • Cable length 2 meters

Plug-in Flow Instrumentation Power Supply (PiPS)

Our Plug-in Power Supply (PiPS) is a flow instrumentation power supply from Bronkhorst that powers your Mass Flow or Pressure Meters and Controllers. The combination of a PiPS with a BRIGHT Local Readout and Control Module forms a straightforward and economical solution for the operation of a stand-alone instrument.

Technical Data

Input voltage
100 to 240 V AC
Input current 600 mA
Frequency 47 to 63 Hz
Efficiency 84% typ. at full load
EMC TESTED TO COMPLY WITH EN 55022: 1998_A1:2000, EN 61000-3-2, E610003-3, EN 61204- 3:2000, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4- 11
Output voltage 15±0.75 V
Output current 500 mA

Environmental Information

Operating temp. 0 to 40°C at maximum load
Storage temp. -10 to 80°C
Humidity 0% to 90% relative humidity
Input transient susceptibility Complies with IEC 61000 requirements

Safety Data

Standards: Fulfills Class II SELV for the following applications: EN 60950/IEC 60950, UL 60950, CSA 950 (cUL), VDE, CE Label

Reliability Specification

Life Expectation: Typical example power consumption 6W (F-201CV with BRIGHT Readout / Flow Control Module) > 5 years at an ambient temperature of 30˚C.

1: USA, 2: Australian, 3: UK, 4: Europe, 5: IEC 320 C18

Mechanical Specification

Weight (approximate): 160 g
AC Connector: Exchangeable mains plug system: EURO, UK, USA / Japan, Australia, IEC
DC Connector:
PiPS-EL – 9 Pin SubD
PiPS-IN – 8DIN Binder or equivalent
PiPS-MV – RJ45
PiPS-ES – M12

Mounting Notes

  • The PiPS comes with 5 different socket-adapters. Select the one for your region or country.
  • Socket adapter nr.5, IEC 320 C18, can be used with a mains power cord with a 2 contact IEC 320 C 17 mains plug. (Power cord is not provided)
  • Be convinced that the socket-adapter is properly connected

Electrical PiPS Instrumentation Power Supply Data

Mains voltage 100-240 Vac (50-60 Hz)
Interchangeable plugs for mains connection Euro, UK, USA, Australian, IEC
Max. power consumption +15 Vdc, 500 mA
Cable length 2 m

Flow Instrumentation Power Supply PiPS Series Model Line-Up

PiPS-EL 9-pin D female, for laboratory style instrumentation
PiPS-IN 8 DIN female, for industrial style instrumentation
PiPS-MV RJ45, for IQ+ instrumentation
PiPS-ES M12, for ES-FLOW, pricing available upon request