POWER-ON, Uninterruptible Power Supply (UPS)

The system uses sealed lead acid batteries for backup power and incorporates all the latest Uninterruptible Power Supply (UPS) features and technology for maximum performance. It is ideal for “point of use” implementation with relatively small or individual controller loads. It is also available for use in either in NEC Classified or Unclassified areas. Furthermore, purge options and other third-party certifications are available.

Highly Customizable Features for POWER-ON Uninterruptible Power Supply

Battery selection provides for a wide range of backup time. Supported 12 VDC battery sizes are between 3.9 and 150 Ah. A typical application using 100 Ah batteries results in a battery backup time of about 9 hours at 22.5 Volts / 10 amps load.

Electrical design provides for segregation of critical and non-critical loads making backup times as long as possible while using the same pair of power supplies.

Redundant Battery Back Up for Critical Processes

Standard primary power can be 120 or 240VAC and output voltage is adjustable.

• redundant battery backup for critical process control, monitoring, and alarm systems
• variety of backup times based on load and battery selection
• uninterrupted power can be supplied to controller, communications electronics, sensors, as well as valves
• allows process to continue running normally despite loss of primary power
• advanced diagnostics and alarming provides confidence that the system is ready to respond to power outages and also brown-outs
• surge protection and monitoring for faults; a contact is available for monitoring and alarming