Industrial Cellular Router, RUT956

RUT956 is a compact industrial 4G (LTE) router with 4x Ethernet ports, WiFi, Dual-SIM, GPS, an I/O connector block, RS232/RS485, and RutOS software for advanced networking solutions.

• Connectivity – 4G LTE (Cat 4), 3G, 2G
• Dual SIM – with auto failover, backup WAN, and other switching scenarios
• Multiple Interfaces – Ethernet, Serial (RS232, RS485) and multiple inputs/outputs for any industrial connectivity use case
• GNSS – Global Navigation Satellite System for location services and time synchronization
• Safety Certifications – UL 121201: Class III; Class I, Division 2, Groups A-D, T4, -40˚C to +75˚C, IP30; UL 62368-1: Class III; FCC Compliant, and more

The RUT956, from Teltonika, is an industrial cellular router that combines wired connectivity, Wi-Fi, and cellular options with automatic GNSS and WAN failover capabilities. With serial communication interfaces, users can integrate a wide range of devices into the network. Meanwhile, advanced RutOS software and diverse I/O options allow for automation, event notifications, and equipment control.

Included with the RUT956 Industrial Cellular Router

• RUT956 router
• 9 W PSU
• 2x mobile antennas (magnetic mount, SMA male, 3 meter cable)
• 2x Wi-Fi antennas (magnetic mount, RP-SMA male, 1.5 meter cable)
• GNSS antenna (adhesive, SMA male, 3 meter cable)
• RS485 connector block in addition to an I/O connector block
• Ethernet cable (1.5 meter) as well as a SIM adapter kit

Features of the RUT956 Industrial Router

• Mobile Module: 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; as well as 2G up to 236.8 DL/236.8 UL kbps
• 3GPP Release: release 11
• SIM Switch: 2 SIM cards, auto-switch cases – weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, and also SIM idle protection
• Status: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, in addition to MNC
• SMS: SMS status, SMS configuration, send/read SMS via http POST/GET, email to SMS, SMS to email, SMS to http, SMS to SMS, scheduled SMS, SMS auto-reply, as well as SMPP
• USSD: supports sending and reading Unstructured Supplementary Service Data messages
• Black/White List: operator black/white list (by country or separate operators)
• Multiple PDN: possibility to use different PDNs for multiple network access as well as services
• Band Management: band lock, used band status display
• SIM PIN Code Management: enables setting, changing, in addition to disabling the SIM card’s PIN
• APN: auto APN
• Bridge: direct connection (bridge) between mobile ISP and also device on LAN
• Passthrough: router assigns its mobile WAN IP address to another device on LAN