CS50 Non-Incendive Pressure Transducer, 50-30,000 PSI

CS50 Non-Incendive Pressure Transducer, 50-30,000 PSI

Product Overview

The CS50 Non-Incendive Pressure Transducer is a high strength sensor designed for use in Class I, Division 2 hazardous locations. This pressure transducer features an all welded stainless steel construction, offering a minimum IP65 rating. A wide range of configurable options make this sensor a versatile pressure transducer designed to operate in some of the harshest conditions. The CS50 is an excellent solution for applications such as natural gas compression, hydrogen compression and storage, and process control instrumentation.

Description

  • CSA Class I, Division 2, Groups A, B, C, D T4 Approved
  • Pressures from 50 PSI up to 30,000 PSI
  • See model CS51 for pressures below 50 PSI
  • One piece design
  • Assembled in New Jersey, USA

Applications

  • Natural gas compression
  • Oil exploration
  • Process controls
  • Hydrogen (316L SS only)

No Conduit Installation Required

In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS50 Non-Incendive Pressure Transducer is offered with an integral Turck Mini-Fast electrical connection. When combined with a Turck cordset (with ITC rated cable) and a Turck Lokfast Guard, there is usually no requirement for conduit to be installed over the cable. This not only makes installation easy but also makes switching out sensors less cumbersome.