CS-SM Steel Mill Pressure Transducer

Category Industrial Pressure Transducers

cs-sm-core-sensors-steel-mill-pressure-transducer-process-solutions-corp

cs-sm-core-sensors-steel-mill-pressure-sensor-process-solutions-texas

CS-SM Steel Mill Pressure Transducer

The CS-SM Steel Mill Pressure Transducer is designed to withstand the rugged demands of the steel mill industry. For durability, it offers a stainless steel body that’s welded to a high strength stainless steel sensing element. The CS-SM offers 4X overpressure protection, integral snubber to protect against pressure transients, and an IP69 rating. It offers a variety of output signals and process connections and either an integral cable or a 6-Pin Bayonet connector for electrical connections.

pressures up to 350 Bar
4X overpressure protection
integral snubber protects against pressure transients
IP69 protection against high pressure washdowns
stamping, roll forming, rolling mill, and pumps

Description

The CS-SM Steel Mill Pressure Transducer is able to withstand the rugged demands of the steel mill industry. It’s ideal for use in stamping, roll forming, rolling mill, and pumps. Standard configuration includes a stainless steel body welded to a high strength stainless steel sensing element. This pressure sensor offers 4X overpressure protection, integral snubber to protect against pressure transients, and an IP69 rating. Electrical connections include integral cable or a 6-Pin Bayonet connector with a variety of output signals and process connections.

≤ ±0.25% BFSL accuracy
pressures up to 350 Bar
4X overpressure protection
IP69 protection against high pressure washdown

CS-SM Steel Mill Pressure Transducer

Snubber: A integral snubber (or restrictor plug) is standard on the CS-SM. It dampens pressure spikes that are common in steel and rolling mill applications. Even with the addition of the snubber, the CS-SM is still capable of responding to pressure quickly. It offers ~1 kHz for voltage outputs and ~250 Hz for 4-20 mA current output.
Overpressure Protection: By carefully selecting the appropriate diaphragm thickness, the CS-SM, from Core Sensors, is capable of achieving 4X overpressure protection and 10X (or 20,000 PSI) burst pressure protection. These protections are critical in applications such as stamping and roll forming. This is due to the fact that sudden pressure events can easily exceed the intended application pressure. Transducers without high overpressure and burst pressure protection run the risk of permanent damage. In addition, they can potentially damage other equipment if the pressure cannot maintain proper monitoring and control.
IP69 Rating: A 6-Pin Bayonet electrical connector is precision TIG welded onto the sensors body. This provides an IP69 rating. In addition, it ensures the sensor will continue operating even during high pressure washdown events.

Specifications

Performance	Thermal	Environmental	Electrical (Current)	Electrical (Voltage)
Accuracy @ 77˚F (25˚C)¹ ≤ ±0.25% BFSL Stability (1 Year) ≤ ±0.25% of FS Pressure Cycles > 100 million Overpressure 4X minimum Burst Pressure 10X or 20,000 PSI, whichever is less	Operating Temperature -40 to 212˚F -40 to 100˚C Compensated Temperature 68 to 194˚F 20 to 90˚C Storage Temperature -40 to 257˚F -40 to 125˚C TC Zero ≤ ±1% of FS TC Span ≤ ±1% of FS	EMI/RFI Protection Yes IP Rating² IP69 Vibration 10 g, 20 to 2400 Hz Shock 100 g, 11 msec, 1/2 sine	Outputs 4-20 mA Excitation 10-28 VDC Current Consumption 20 mA, typical Output Load 0-800 Ohms @ 10-28 VDC Frequency Response (min) ~250 Hz Zero Offset (of FS) ±1% max Span Tolerance (of FS) ±1.5% max	Outputs 1-5 V 1-6 V Excitation 10-28 VDC Current Consumption < 10 mA Output Load 5 K Ohms, min Frequency Response (min) ~1 kHz Zero Offset (of FS) ±1% max Span Tolerance (of FS) ±1.5% max
¹Accuracy includes non-linearity, hysteresis and non-repeatability. ²IP Rating is dependent on electrical termination selected. Contact us for more information. IP Rating applies when electrical connector is attached with the appropriate ingress protection.

Performance

Thermal

Environmental

Electrical (Current)

Electrical (Voltage)

Accuracy @ 77˚F (25˚C)¹

≤ ±0.25% BFSL

Stability (1 Year)

≤ ±0.25% of FS

Pressure Cycles

> 100 million

Overpressure

4X minimum

Burst Pressure

10X or 20,000 PSI,
whichever is less

Operating Temperature

-40 to 212˚F
-40 to 100˚C

Compensated Temperature

68 to 194˚F
20 to 90˚C

Storage Temperature

-40 to 257˚F
-40 to 125˚C

TC Zero

≤ ±1% of FS

TC Span

≤ ±1% of FS

EMI/RFI Protection

IP Rating²

IP69

Vibration

10 g, 20 to 2400 Hz

Shock

100 g, 11 msec, 1/2 sine

Outputs

4-20 mA

Excitation

10-28 VDC

Current Consumption

20 mA, typical

Output Load

0-800 Ohms @ 10-28 VDC

Frequency Response (min)

~250 Hz

Zero Offset (of FS)

±1% max

Span Tolerance (of FS)

±1.5% max

Outputs

1-5 V
1-6 V

Excitation

10-28 VDC

Current Consumption

< 10 mA

Output Load

5 K Ohms, min

Frequency Response (min)

~1 kHz

Zero Offset (of FS)

±1% max

Span Tolerance (of FS)

±1.5% max

¹Accuracy includes non-linearity, hysteresis and non-repeatability.
²IP Rating is dependent on electrical termination selected. Contact us for more information. IP Rating applies when electrical connector is attached with the appropriate ingress protection.