PR 9113A-EMP mA Temperature Converter
PR 9113A-EMP mA Temperature Converter
- Input for RTD, TC, and mA
- Active/passive mA output via the same two terminals
- 1 or 2 channels
- EMPHASIS assessed instrument for the nuclear industry
- SIL 2-certified via Full Assessment
Description
- Configuration and monitoring by way of detachable display front (PR 4511 / PR 4501); process calibration and signal simulation
- Copying of the configuration from one device to others of the same type via the display front
- TC inputs can use either the internal CJC or a terminal with a built-in Pt100 sensor (PR 5910, channel 1 / PR 5913, channel 2) for higher accuracy
- Advanced monitoring of internal communication and stored data
- SIL 2 functionality is optional and must be activated in a menu point
Application
- The device can be mounted in and receive signals from non-classified area and zone 2
- Conversion and scaling of temperature (Pt, Ni and TC) and active current signals
- 9113A-EMP has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508
- Suitable for the use in systems up to Performance Level “d” according to ISO-13849
Technical Characteristics
- 1 green and 2 red front LEDs indicate operation status and malfunction
- 2.6 kVAC galvanic isolation between input, output and supply
- Can be supplied separately or installed on power rail, PR type 9400
Mounting
- The devices can be mounted vertically or horizontally without distance between neighbouring units
