XL15 Prime: HMI, PLC, and I/O All-in-One Automation Controller
XL15 Prime: HMI, PLC, and I/O All-in-One Automation Controller
The XL15 Prime has an all-new design that has narrower bezels and a 14% smaller footprint overall. This automation controller is also one of the first Horner Automation products to utilize USB Type C. With a more advanced processor and modern memory architecture, users can enjoy XL Prime Series levels of performance increase and 100% non-volatile memory with just a coin cell battery for its real time clock.
- HMI, PLC, and I/O all-in-one compact unit
- New, from Horner Automation
- Free Cscape Programming Software
- Remote Access via WebMI, MQTT
- Modbus and Ethernet Enabled
Description
The XL15 Prime features a logic engine with 2MB of application memory and a 0.02 mS/K logic scan. With its Online Programming Mode, this automation controller allows users to make logic changes on the fly without going through stop mode.
Operator Interface Features of the XL15 Prime Automation Controller
- 1024×768 LCD TFT color graphics display with a high resolution resistive touchscreen
- 7 virtual function keys and system key
- programming available via USB-C
- USB 2.0 Host port (A) is available for exchanging files with
- USB FLASH drives
- two (2) RS-232 / RS-485 ports to support RTU / Modbus Commander / Responder (Master / Slave), ASCII In / Out, and PLC / Drive downloadable protocols
Networking Features
- two (2) built-in 10/100 Ethernet port
- two (2) integrated CAN ports that support CsCAN and either CANopen, SAE J1939, or DeviceNet Scanner simultaneously
- all units feature a microSD slot, supporting at least 32GB
|
![]() |
I/O Overview
The XL15 Prime is a compact automation controller that contains high density and very versatile I/O (input / output). Using the I/O properly requires wiring to the proper terminals, configuring jumpers inside the Horner OCS unit and configuring Cscape properly. The inputs are designed to support both positive and negative input modes. For many models, the mode is set by a jumper setting and a configuration parameter in Cscape. FurFurthermore, elay outputs are designed to switch loads that typically have high voltage or current requirements or require the isolation that relays provide.
XL15 Prime Automation Controller Model Line-Up
Model | Configuration |
---|---|
HE-XP15E0 | No built-in I/O |
HE-XP15E2 | 12 DC in, 6 Relay Out, 4 – 12-bit Analog In |
HE-XP15E3 | 12 DC in, 12 DC Out, 2 – 12-bit Analog In |
HE-XP15E4 | 24 DC in, 16 DC Out, 2 – 12-bit Analog In |
HE-XP15E5 | 12 DC in, 12 DC Out, 2 – 14/16-bit Analog In (mA/V/Tc/mV/RTD), 2 – 12-bit Analog Out |
HE-XP15E6 | 12 DC in, 12 DC Out, 6 – 14/17-bit Analog In (mA/V/Tc/mV/RTD), 4 – 12-bit Analog Out |
You may also like…
-
WebMI, Remote Automation Control
-
XL4 Prime Series, PLC / HMI Controller
$1,270.00 – $1,791.00 Select options This product has multiple variants. The options may be chosen on the product page -
Canvas 10D HMI with PLC
$3,199.00 – $3,672.00 Select options This product has multiple variants. The options may be chosen on the product page -
XL10 Prime Series, PLC Automation Controller
$3,497.00 – $4,060.00 Select options This product has multiple variants. The options may be chosen on the product page
Related Products
Related products
-
OEE System, Overall Equipment Effectiveness
-
X5 Prime Automation Controller
-
XL10W Prime – Automation Controls HMI, PLC, and I/O
-
Canvas 7D, Programmable PLC
$2,480.00 – $3,016.00 Select options This product has multiple variants. The options may be chosen on the product page