PID Cable for Low Flow Instrumentation

A PID cable is for connecting flow accessories to the E-8000 Series. They will connect external sensors, actuators, or IN-FLOW valves to sensor inputs or actuator outputs of the Bronkhorst E-8000 Series PID. These cables offer DB9, M8 4-pin, and DIN43650C connection types, which are ideal for creating secure connections that are still easy to connect and disconnect. Some cables also offer loose ends. Loose ends are good for hardwiring flow accessories to the E-8000 Series, to create a more permanent connection.

The E-8000 Series from Bronkhorst is a read out display and flow control unit for digital Mass Flow Meters and Controllers, Pressure Meters and Controllers. It also works with other transmitters and transducers with RS-232 communication. The E-8000 Series has one or two color TFT displays per module for indication of measured and totalized values. Additionally, it includes a push button menu. This allows users to easily change the set point, reset the counter value, select another fluid, and many other functions.

Multichannel Configurations for Flow Control

The modular design of the E-8000 Series, a digital readout and flow control unit, allows easy to assemble, multichannel configurations in 1/2 19” and 19” housings. And this unit is best for either rack mount or table top setups. The exact number of channels to be served with one (1/2 19”) or two (19”) power supplies depends on the flow meters and controllers. But for most applications, one power supply can serve at least four channels.

Flow Control Unit for Gas Flows, Vapor Flows, Ex-Proof Flows, and PID-Controllers

For Controlled Evaporation Mixing (CEM) Systems, a single channel module for temperature control can be integrated into a 1-channel cassette and 1/2 19” or 19” housings. However, Bronkhorst also offers dedicated modules for Ex-Proof instruments and configurations with third party sensors or actuators requiring a PID controller. These modules are all available with or without display and with various fieldbus options.

PID Cable for Connecting Low Flow Accessories to the Bronkhorst E-8000 Series

Picture	Flow Accessory Connection	Connection Readout	Function	Length	Part Number
	DB9 (male)	Loose End	Connect external 4-wire sensor to sensor input for E-8000 PID	3 meters	7.03.510
			Connect external 2-wire sensor to sensor input for E-8000 PID	3 meters	7.03.578
	M8 4-pin	Loose End	Connect actuator to actuator output for E-8000 PID	3 meters	7.03.622
		DIN43650C	Connect IN-FLOW valve to actuator output of E-8000 PID	3 meters	7.03.623