OPTIFLUX 2050 for Water Flow Measurement

The OPTIFLUX 2050 is an electromagnetic flowmeter (magmeter) for basic and advanced water flow measurement in wastewater and municipal water applications. It is suitable for all cost-effective measurements where extremely high accuracy, extensive diagnostics, or a wide range of communication options are not a priority. This magmeter has a wide diameter range: DN25 to DN1200 (1 to 48″). In addition, this magmeter for water flow measurement offers all available approvals for drinking water. The extra isolation of its electronics as well as its special housing makes the OPTIFLUX 2050, from KROHNE, particularly suitable for use in areas with extreme humidity.

• flange: DN25 to DN1200 (1 to 48″), maximum PN40 / ASME Cl 300
• 4-20 mA, pulse, frequency, status, HART, Modbus
• rugged liners suitable for any water and wastewater application
• proven and unsurpassed lifetime, huge installation base
• drinking water approvals such as KTW, KIWA, DVGW, ACS, NSF, WRAS
• meets potable water standards such as ACS, DVGW, NSF, TZW, WRAS, etc.
• compliant with requirements for custody transfer (MID MI-001, OIML R49, ISO 4064, as well as EN 14154)
• easy installation and commissioning as well as maintenance-free

The OPTIFLUX 2050 also features a full bore design with wear resistant liner materials. Installation in measurement chambers subject to (constant) flooding is possible with the IP68 / NEMA 6P rating version. This magmeter for water flow measurement comes with current output (including HART) and active pulse/frequency output in addition to Modbus. Furthermore, operators can carry out a full on-site verification of the OPTIFLUX 2050 without process interruption using the OPTICHECK service tool.

Features of the OPTIFLUX 2050 Magmeter for Water Flow Measurement*

• bi-directional flow measurement over a wide dynamic range
• IP68 rating electronics for use in areas with extreme humidity and chances of flooding
• standard wet calibration
• PP or hard rubber liner: excellent chemical resistance
• signal converter with display or as blind version
• tamper proof, fully welded construction, also available in customer specific constructions
• full bore design: no moving parts, no wear, no pressure loss
• standard in house wet calibration of flow sensors up to diameter DN3000
• on-site verification of flowmeter with OPTICHECK service tool

*Product features and options depend on device configuration. Contact us to make sure that your functionality requirements are available in a single device.

Common Uses for the OPTIFLUX 2050 for Water Flow Measurement

• all simple municipal water as well as wastewater applications
• abstraction and irrigation
• monitoring of distribution networks
• water circulation and treatment systems
• water purification and desalination
• revenue metering or billing leakage detection
• irrigation as well as cooling water
• sewage and sludge
• sea water