M-Th: 8AM-5PM

Fri: 7:30AM-3PM

M-Th: 8AM-5PM

Fri: 7:30AM-3PM

Feed Through Terminal

Feed Through Terminal

$21.92

These wiring accessories, from DEHN, are feed through terminals for busbar wiring.

  • allows change of the wiring levels
  • supports a lightning impulse current conform installation of arrester combinations

Description

dehn-feed-through-terminal-busbar-wiring-industrial-surge-protection-spd-lightning-safety-process-solutionsThese DEHN wiring accessories are a feed through terminal series for busbar wiring.

  • allows change of the wiring levels

Feed Through Terminal Series

900699 / DK 35
  • supports a lightning impulse current conform installation of arrester combinations
Nominal Load Current AC (IL): 100 A
Test Current According to EN 60947-7-1 125 A
Lightning Impulse Current (10/350 μs) 100 kA
Backup Fuse for Application of Arrester Only ≤ 250 A gL/gG
Backup Fuse Carrying Operating Current ≤ 100 A gL/gG
Short Circuit Withstand Capability for Maximum Backup Fuse 50
Operating Temperature Range (TU) -40 to 176˚F (-40 to 80°C)
Cross-Sectional Area minimum 1.5 mm2 solid / flexible;
maximum 35 mm2 stranded, 25 mm2 flexible
For Mounting on 35 mm DIN rail according to EN 60715
Enclosure Material thermoplastic, red, UL 94 V-0
Degree of Protection IP 20
Capacity 1 mod., DIN 43880
952699 / DK 25
  • for a lightning current suitable installation of arrester combinations
Nominal Voltage (AC / DV) (UN) 500 V
Nominal Load Current (AC) (IL) 100 A
Test Current According to EN 60947-7-1 100 A
Lightning Impulse Current (10/350 μs) 100 kA
Rated Insulation Voltage (Ui) 630 V
Rated Impulse Withstand Voltage (Uimp) 6 kV
Operating Temperature Range (TU) -40 to 176˚F (-40 to 80˚C)
Cross-Sectional Area (minimum) 1.5 mm2 solid / flexible
Cross-Sectional Area (maximum) 25 mm2 stranded
16 mm2 flexible
For Mounting on 35 mm DIN rails according to EN 60715
Enclosure Material thermoplastic, red, UL 94 V-0
Degree of Protection IP 20
Capacity 1 module, DIN 43880

You may also like…

Related Products