CS80 Intrinsically Safe Pressure Transducer, 50-30,000 PSI

Category Intrinsically Safe Tag HazLoc rated

CS80-Intrinsically-Safe-Pressure-Transducer-Core-Sensors-Process-Solutions-Corp

CS80-Intrinsically-Safe-Pressure-Transmitter-Core-Sensors-Process-Solutions-Texas

CS80-IS-Hazardous-Area-Pressure-Transducer-Core-Sensors-Process-Solutions-Corp

CS80-IS-Hazardous-Location-Pressure-Transmitter-Core-Sensors-Process-Solutions-Texas

CS80-Hazloc-Intrinsically-Safe-Pressure-Sensor-Core-Sensors-Distributor-PSC-Texas

CS80 Intrinsically Safe Pressure Transducer, 50-30,000 PSI

The CS80 Intrinsically Safe Pressure Transducer is an industrial quality sensor for use in Class I, Division 1 intrinsically safe areas. This hazardous area pressure sensors offers a wide range of configurable options, making it a versatile pressure transducer that is suitable for operation in many harsh conditions. Additionally, the CS80, from Core Sensors, features an all welded stainless steel construction for a minimum IP65 rating.

pressures from 50 to 30,000 PSI
one piece diaphragm design with no internal O-rings or welds
wide variety of configurations available
IP65 minimum rated
approval and certifications: CSA Class I, Division 1 Groups C,D T4; Class I, Zone 0 AEx ia IIB T4 Ga (Ex ia IIB T4 Ga); ANSI/UL 122701 Single Seal; ABS; CE

Description

The CS80 Intrinsically Safe Pressure Transducer is a high strength sensor for use in Class I, Division 1 intrinsically safe areas. The CS80 features an all welded stainless steel construction for a minimum IP65 rating. A wide range of configurable options make the CS80, from Core Sensors, a versatile pressure transducer that can operate in some the harshest conditions.

Low power outputs are available which can operate off of 3-5 VDC of unregulated power to extend battery life in remote applications. The CS80 is an excellent solution for applications such as natural gas compression and oil exploration. Caution must be taken when installing and operating hazardous area pressure sensors in known Class I, Division 1 locations. Please review the Intrinsically Safe Operating Instructions prior to installation.

plug and play installation
CSA Class I, Division 1, Groups C, D T4 approval
pressures from 50 to 30,000 PSI
see model CS81 for pressures below 50 PSI
one piece design
assembly in New Jersey, USA

CS80 Intrinsically Safe Pressure Transducer

We offer a variety of high quality accessories to bundle with the CS80 Intrinsically Safe Pressure Transducer to simplify installation. Common accessories include:

mating cordsets
field wireable mating connectors
cooling adapters

Specifications

Performance	Thermal	Environmental
Accuracy @ 77˚F (25˚C)¹ ≤ ±0.25% BFSL ≤ ±0.5% BFSL (> 10,000 PSI) ≤ ±1% BFSL (Millivolt output signal) Stability (1 Year) ≤ ±0.25% of FS Pressure Cycles 100 million Overpressure 2X minimum Burst Pressure 5X or 60,000 PSI, whichever is less	Operating Temperature -40 to 176˚F -40 to 80˚C Operating Temperature (Electrical connection “F”, DIN 43650-A) -4 to 176˚F -20 to 80˚C Media Temperature -40 to 257˚F -40 to 125˚C Media Temperature (Electrical connection “F”, DIN 43650-A) -40 to 221˚F -40 to 105˚C Compensated Temperature 32 to 131˚F 0 to 55˚C Storage Temperature -40 to 257˚F -40 to 125˚C TC Zero ≤ ±1% of FS TC Span ≤ ±1% of FS	EMI/RFI Protection Yes IP Rating² IP65 minimum Vibration 10 g, 20 to 2000 Hz Shock 100 g, 11 msec, 1/2 sine
¹Accuracy includes non-linearity, hysteresis and non-repeatability. ²IP Rating is dependent on electrical termination selected. Contact us for more information. IP Rating applies when electrical connector is attached with the appropriate ingress protection.

Performance

Thermal

Environmental

Accuracy @ 77˚F (25˚C)¹

≤ ±0.25% BFSL
≤ ±0.5% BFSL (> 10,000 PSI)
≤ ±1% BFSL (Millivolt output signal)

Stability (1 Year)

≤ ±0.25% of FS

Pressure Cycles

100 million

Overpressure

2X minimum

Burst Pressure

5X or 60,000 PSI, whichever is less

Operating Temperature

-40 to 176˚F
-40 to 80˚C

Operating Temperature
(Electrical connection “F”, DIN 43650-A)

-4 to 176˚F
-20 to 80˚C

Media Temperature

-40 to 257˚F
-40 to 125˚C

Media Temperature
(Electrical connection “F”, DIN 43650-A)

-40 to 221˚F
-40 to 105˚C

Compensated Temperature

32 to 131˚F
0 to 55˚C

Storage Temperature

-40 to 257˚F
-40 to 125˚C

TC Zero

≤ ±1% of FS

TC Span

≤ ±1% of FS

EMI/RFI Protection

IP Rating²

IP65 minimum

Vibration

10 g, 20 to 2000 Hz

Shock

100 g, 11 msec, 1/2 sine

¹Accuracy includes non-linearity, hysteresis and non-repeatability.
²IP Rating is dependent on electrical termination selected. Contact us for more information. IP Rating applies when electrical connector is attached with the appropriate ingress protection.

Electrical Specifications

Current	Voltage	Ratiometric	Low Power	Millivolt
Outputs 4-20 mA Excitation 10-28 VDC Current Consumption 20 mA, typical Output Load 0-800 Ohms @ 10-28 VDC Frequency Response (min) ~250 Hz Zero Offset (of FS) ≤ ±0.5% typical, ±1% max Span Tolerance (of FS) ≤ ±0.5% typical, ±1% max	Outputs 1-5 V 1-6 V Excitation 10-28 VDC Current Consumption < 10 mA Output Load 5 K Ohms, min Frequency Response (min) ~1 kHz Zero Offset (of FS) ≤ ±0.5% typical, ±1% max Span Tolerance (of FS) ≤ ±0.5% typical, ±1% max	Outputs 0.5-4.5 V ratiometric Excitation 5 VDC ±0.5V Current Consumption < 10 mA Output Load 5 K Ohms, min Frequency Response (min) ~1 kHz Zero Offset (of FS) ≤ ±0.5% typical, ±1% max Span Tolerance (of FS) ≤ ±0.5% typical, ±1% max	Outputs 0.5-2.5 V non-ratiometric Excitation 3-5 VDC unregulated Current Consumption ≤ 3 mA Output Load 5 K Ohms, min Frequency Response (min) ~1 kHz Zero Offset (of FS) ≤ ±0.5% typical, ±1% max Span Tolerance (of FS) ≤ ±0.5% typical, ±1% max	Outputs 10 mV/V Excitation 5 VDC, typical Current Consumption < 5 mA Output Load > 1 M Ohms Frequency Response (min) ~5 kHz Zero Offset (of FS) ≤ ±2% Span Tolerance (of FS) ≤ ±2%

Current

Voltage

Ratiometric

Low Power

Millivolt

Outputs

4-20 mA

Excitation

10-28 VDC

Current Consumption

20 mA, typical

Output Load

0-800 Ohms @ 10-28 VDC

Frequency Response (min)

~250 Hz

Zero Offset (of FS)

≤ ±0.5% typical, ±1% max

Span Tolerance (of FS)

≤ ±0.5% typical, ±1% max

Outputs

1-5 V
1-6 V

Excitation

10-28 VDC

Current Consumption

< 10 mA

Output Load

5 K Ohms, min

Frequency Response (min)

~1 kHz

Zero Offset (of FS)

≤ ±0.5% typical, ±1% max

Span Tolerance (of FS)

≤ ±0.5% typical, ±1% max

Outputs

0.5-4.5 V ratiometric

Excitation

5 VDC ±0.5V

Current Consumption

< 10 mA

Output Load

5 K Ohms, min

Frequency Response (min)

~1 kHz

Zero Offset (of FS)

≤ ±0.5% typical, ±1% max

Span Tolerance (of FS)

≤ ±0.5% typical, ±1% max

Outputs

0.5-2.5 V non-ratiometric

Excitation

3-5 VDC unregulated

Current Consumption

≤ 3 mA

Output Load

5 K Ohms, min

Frequency Response (min)

~1 kHz

Zero Offset (of FS)

≤ ±0.5% typical, ±1% max

Span Tolerance (of FS)

≤ ±0.5% typical, ±1% max

Outputs

10 mV/V

Excitation

5 VDC, typical

Current Consumption

< 5 mA

Output Load

> 1 M Ohms

Frequency Response (min)

~5 kHz

Zero Offset (of FS)

≤ ±2%

Span Tolerance (of FS)

≤ ±2%

Model Configuration Guide for the CS80 Intrinsically Safe Pressure Transducer

Approvals and Certifications

NOTE: Users must use an approved barrier to maintain listed certifications. See page 4 of the data sheet for entity parameters.

(281) 491-3833

[email protected]

Request Quote

Stafford, Texas