CS20 Industrial Temperature Transmitter

Category Temperature Transmitters

cs20-industrial-temperature-sensor-core-sensors-temp-transmitter-psc-texas

cs20-industrial-temperature-transmitter-core-sensors-process-solutions-corp

cs20-industrial-temperature-sensor-core-sensors-process-solutions-texas

cs20-industrial-temp-transmitter-core-sensors-temperature-sensor-process-solutions-texas

CS20 Industrial Temperature Transmitter

The CS20 Industrial Temperature Transmitter is designed for fluid temperature measurement such as water and chemical storage, hydraulic oil fluids, gear box lubrication systems, gas flow temperature, and more. This temperature transmitter, from Core Sensors, features a 316L SS probe, thread area, and internal amplifier with a 4-20 mA or 1-5 V output signal allow for easy installation in a wide range of process liquids and gases. Configurable temperature ranges from -40 to 392˚F (-40 to 200˚C) are available with various probe lengths.

amplified 4-20mA or 1-5V output signal
316L SS probe and process connection
reverse polarity and EMI protection
configurable temperature ranges from -40 to 392˚F (-40 to 200˚C)

Description

The CS20 Industrial Temperature Transmitter is ideal for fluid temperature measurement applications. A 316L SS probe and thread area allow for installation in a wide range of process liquids and gases. An internal amplifier offers a 4-20 mA or 1-5 V output signal to reduce installation time. Configurable temperature ranges from -40 to 392˚F (-40 to 200˚C) are available with various probe lengths.

no external amplification necessary
configurable temperature ranges from -40 to 392˚F (-40 to 200˚C)
amplified 4-20 mA or 1-5 V output signal
316L SS probe and process connection
reverse polarity and EMI protection

CS20 Industrial Temperature Transmitter

The CS20 Industrial Temperature Transmitter features an internal amplifier, offering either a 4-20 mA or 1-5 V output signal. This eliminates the need for the user to amplify the ohm resistance from the RTD. The CS20 temperature transmitter, from Core Sensors, can connect directly to an existing data acquisition system in minutes with minimal setup. Refer to the “Model Number Configuration” section below for the available calibration temperature ranges.

Various probe lengths and electrical connectors, including a DIN43650-A or M12x1 Eurofast, are available to further simplify installation.

Specifications of the CS20 Industrial Temperature Transmitter

Performance	Thermal	Environmental	Electrical (Current)	Electrical (Voltage)
Sensor Type RTD PT100, Class B Total Error at RT ≤ ±1% Total Error at FS ≤ ±2% Max Pressure 5,000 PSI	Ambient Operating Temperature -40 to 185˚F) -40 to 85˚C Media Temperature¹ -40 to 392˚F -40 to 200˚C Storage Temperature -40 to 257˚F -40 to 125˚C	EMI/RFI Protection Yes IP Rating² IP65 minimum	Outputs 4-20 mA Excitation 10-28 VDC Current Consumption 20 mA, typical Output Load 0-800 Ohms @ 10-28 VDC Frequency Response (min) ~250 Hz Zero Offset (of FS) ≤ ±0.5% typical, ±1% max Span Tolerance (of FS) ≤ ±0.5% typical, ±1% max	Outputs 1-5 V Excitation 10-28 VDC Current Consumption < 10 mA Output Load 5 K Ohms, min Frequency Response (min) ~1 kHz Zero Offset (of FS) ≤ ±0.5% typical, ±1% max Span Tolerance (of FS) ≤ ±0.5% typical, ±1% max
¹Media temperature is user selected at the time of ordering. Not all transmitters are scaled to measure -40 to 392˚F (-40 to 200˚C). Refer to the “Model Number Configuration” section below for available ranges. ²IP Rating is dependent on electrical termination selected. Contact us for more information. IP Rating applies when electrical connector is attached with the appropriate ingress protection.

Performance

Thermal

Environmental

Electrical (Current)

Electrical (Voltage)

Sensor Type

RTD
PT100, Class B

Total Error at RT

≤ ±1%

Total Error at FS

≤ ±2%

Max Pressure

5,000 PSI

Ambient Operating Temperature

-40 to 185˚F)
-40 to 85˚C

Media Temperature¹

-40 to 392˚F
-40 to 200˚C

Storage Temperature

-40 to 257˚F
-40 to 125˚C

EMI/RFI Protection

IP Rating²

IP65 minimum

Outputs

4-20 mA

Excitation

10-28 VDC

Current Consumption

20 mA, typical

Output Load

0-800 Ohms @ 10-28 VDC

Frequency Response (min)

~250 Hz

Zero Offset (of FS)

≤ ±0.5% typical, ±1% max

Span Tolerance (of FS)

≤ ±0.5% typical, ±1% max

Outputs

1-5 V

Excitation

10-28 VDC

Current Consumption

< 10 mA

Output Load

5 K Ohms, min

Frequency Response (min)

~1 kHz

Zero Offset (of FS)

≤ ±0.5% typical, ±1% max

Span Tolerance (of FS)

≤ ±0.5% typical, ±1% max

¹Media temperature is user selected at the time of ordering. Not all transmitters are scaled to measure -40 to 392˚F (-40 to 200˚C). Refer to the “Model Number Configuration” section below for available ranges.
²IP Rating is dependent on electrical termination selected. Contact us for more information. IP Rating applies when electrical connector is attached with the appropriate ingress protection.