CS11 Compact Media Isolated Pressure Sensor

CS11-Compact-Media-Isolated-Pressure-Sensor-Core-Sensors-PSC-Texas

CS11-Compact-Media-Isolated-Pressure-Transducer-Core-Sensors-Process-Solutions-Texas

CS11-Compact-Media-Isolated-Pressure-Transmitter-Core-Sensors-Distributor-PSC-Texas

CS11 Compact Media Isolated Pressure Sensor

The CS11 Compact Media Isolated Pressure Sensor offers a compact design for an economical choice in applications with minimal installation space. It is ideal for pressure ranges from 0-2 up to 2,000 PSI. This pressure sensor features a silicone sensing element with isolation via a fluid filled cavity. Configurations for this pressure transducer, from Core Sensors, are available with a millivolt output signal and 316L SS wetted material for compatibility in a variety of medias.

pressures from 0-2 PSI to 2,000 PSI
compact design
10 mV/V output signal
flush diaphragm available
RoHS compliant

Description

The CS11 Compact Media Isolated Pressure Sensor features a silicone sensing element with isolation via a fluid filled cavity. Configurations for this pressure sensor, from Core Sensors, are available with a millivolt output signal and 316L SS wetted material for compatibility in a variety of medias. With available pressure ranges from 0-2 up to 2,000 PSI, and a compact design, the CS11 is an economical choice in applications with minimal installation space.

small profile with excellent performance
≤ ±0.25% BFSL accuracy
pressures from 0-2 to 2,000 PSI
compact design
flush diaphragm available

CS11 Compact Media Isolated Pressure Sensor

The CS11 Compact Media Isolated Pressure Sensor is an ideal pressure transducer for applications requiring a small profile with reliable, repeatable performance. Threadless configurations with an O-ring seal are available for easy installation into pressure manifolds. Need a threaded connection? No problem! The CS11 can configure with a threaded process connection such as 1/4″ or 1/8″ Male NPT.

The CS11 not only offers a small profile, but it also offers high performance. Pressure transfers from the 316L SS diaphragm to the sensing element via a fluid filled cavity. This fluid filled design results in a highly stable and fast response pressure measurement over a wide operating temperature range. With its configurable design, this pressure transducer allows broad customization possibilities. Don’t see the configuration you need? Contact us today and let us know your requirements!

Specifications

Performance	Thermal	Environmental²	Electrical (Millivolt)
Accuracy @ 77˚F (25˚C)¹ ≤ ±0.25% BFSL ≤ ±0.5% BFSL (2 PSI) Stability (1 Year) ≤ ±0.25% of FS Pressure Cycles 10 million Overpressure 2X minimum Burst Pressure 5X or 4,000 PSI, whichever is less	Operating Temperature -40 to 248˚F -40 to 120˚C Compensated Temperature 32 to 158˚F 0 to 70˚C Storage Temperature -40 to 257˚F -40 to 125˚C TC Zero ≤ ±1.5% of FS TC Span ≤ ±1.5% of FS	EMI/RFI Protection No Vibration 10 g, 20 to 2000 Hz Shock 100 g, 11 msec, 1/2 sine	Outputs 10 mV/V Excitation 5 VDC typical 10 VDC typical Current Consumption < 5 mA Input Impedance 5000 Ohms, typical Output Impedance 5000 Ohms, typical Zero Offset (of FS) ≤ ±2% Span Tolerance (of FS) ≤ ±2%
¹Accuracy includes non-linearity, hysteresis and non-repeatability. ²IP Rating is dependent on electrical termination selected. Contact us for more information. IP Rating applies when electrical connector is attached with the appropriate ingress protection.

Performance

Thermal

Environmental²

Electrical (Millivolt)

Accuracy @ 77˚F (25˚C)¹

≤ ±0.25% BFSL
≤ ±0.5% BFSL (2 PSI)

Stability (1 Year)

≤ ±0.25% of FS

Pressure Cycles

10 million

Overpressure

2X minimum

Burst Pressure

5X or 4,000 PSI,
whichever is less

Operating Temperature

-40 to 248˚F
-40 to 120˚C

Compensated Temperature

32 to 158˚F
0 to 70˚C

Storage Temperature

-40 to 257˚F
-40 to 125˚C

TC Zero

≤ ±1.5% of FS

TC Span

≤ ±1.5% of FS

EMI/RFI Protection

Vibration

10 g, 20 to 2000 Hz

Shock

100 g, 11 msec, 1/2 sine

Outputs

10 mV/V

Excitation

5 VDC typical
10 VDC typical

Current Consumption

< 5 mA

Input Impedance

5000 Ohms, typical

Output Impedance

5000 Ohms, typical

Zero Offset (of FS)

≤ ±2%

Span Tolerance (of FS)

≤ ±2%

¹Accuracy includes non-linearity, hysteresis and non-repeatability.
²IP Rating is dependent on electrical termination selected. Contact us for more information. IP Rating applies when electrical connector is attached with the appropriate ingress protection.