Aqua2000-5x(P1), Outdoor Water Quality Tester
Aqua2000-5x(P1), Outdoor Water Quality Tester
The Aqua2000-5x(P1) is a multi-parameter Water Quality Tester designed for outdoor use that automatically and continuously measures water quality in real time. It measures turbidity, free chlorine, pH, electrical conductivity, and water temperature as well as flow rate at the same time. The optimized sample flow system enables it to provide accurate and stable water quality measurement data even under the most challenging conditions.
- high-precision, high-durability, reagent-free
- simultaneous measurement of 6 water quality points
- conductivity
- turbidity
- pH
- free chlorine
- flow rate
- water temperature
- SUS double insulation enclosure for outdoor use
Description
The Aqua2000-5x(P1) is a Water Quality Tester that offers a water-proof and dust-proof design to provide stable measurement conditions in various external environments. It is the outdoor version of the model Aqua2000-5x. This Water Analyzer automatically and continuously measures the water quality of tap water in real time and transmits data. It is an eco-friendly, high-precision multiparameter (6-in-1) water quality measuring instrument that analyzes turbidity, pH, free chlorine, conductivity, water temperature, and flow rate. The Aqua2000-5x(P1), from Bluesen, features optimal fluid engineering of the sample flow measurement structure. This makes it possible to provide accurate and stable water quality measurement data even in changing environmental conditions that may occur at the installation and operation site.
- high-precision, high-durability, reagent-free
- low maintenance cost
- triple bubble removal structure
- smart metering technology
- auto/remote diagnostics and flush
- plug and play – auto identification and operation remote maintenance:
- diagnostics
- flushing
- control
- S/W upgrade equipped with sample flow monitoring function
6-in-1 Water Quality Tester
Free Chlorine Measurement
- Measurement Method: polarograph amperometry method (regent free)
- Structure: electrode protection by membrane cap
- Measurement Type: pH and temperature auto compensation
- Measurement Range: 0-2/10 mg/L (range can be set)
- Reproducibility: ± 1%
Turbidity Sensor
- Measurement Method: 90˚ scattering light method
- Light Source: tungsten lamp
- Measurement Range: 0-2/10/200 NTU (available to set the range)
- Reproducibility: ± 1%
pH Meter
- Measurement Method: composite glass electrode
- Measurement Type: temperature auto compensation
- pH Measurement Range: 0 to 14
- Reproducibility: ± 1%
Conductivity Measurement
- Measurement Method: AC 2 polar method
- Electrode Material: titanium
- Measurement Type: temperature auto compensation
- Measurement Range: 0-5,000 μS/cm (available to set the range)
- Reproducibility: ± 1%
Water Temperature
- Measurement Method: PT1000Ω
- Electrode Material: platinum thermometer
- Measurement Range: -4 to 158˚F (-20 to 70˚C)
- Accuracy: ± 0.2˚C
Features of the Aqua2000-5x
Enclosure | |
---|---|
Size (mm) | 600(W) x 810(H) x 450(D) |
Waterproof | IP643 rating |
Operating Temperature | -4 to 158˚F (-20 to 70˚C) |
Control Unit | |
CPU | 92 bit microprocessor |
Analog Output (4-20 mA) | 6 points |
Digital Output (contact) | 4 points |
Display | 7 inch TFT LCD touchscreen |
Communication Options | RS232, RS485, Ethernet |
Download Options | USB, SD card |
Power Commutation | AC100/240V, 50/60Hz 34W |
Multiparameter Measure Unit | |
Inlet / Outlet Diameter | 10Ø |
Flux | 150 to 500 mL/min |