PR 5715 Programmable LED Indicator

• display for digital readout of current, voltage, resistance, temperature, or 3-wire potentiometer signals
• process control with 4 pairs of potential-free change-over relays and analog output
• ideal for tank level control with the possibility of customer linearization, thus ensuring correct level measurement and control in non-linear tanks

Technical Characteristics of the PR 5715 Programmable LED Indicator

• 4-digit LED indicator with 13.8 mm 14-segment characters.
  • maximum display readout: -1,999 to 9,999
  • programmable decimal point
  • relay on / off indication
• all standard operational parameters can be adjusted to any application by way of the front function keys
  • when using a PC for programming and configuration via the program PReset, additional configuration options are available: customer-defined linearization and special input signals
• user can select help texts in eight languages via a menu item
• menu option allows user to minimize installation test time for the relay outputs
  • simply activate / deactivate each relay independently of the input signal
• 2.3 kVAC galvanic isolation between input, output, and supply

Easy Mounting and Installation

• For mounting in panel front
• the included rubber packing must be mounted between the panel cutout hole and the display front to obtain a protection degree of IP65 (type 4X)
• for extra protection in extreme environments, an accessory PR 8335 splash-proof cover is available specifically for the PR 5715

User-friendly Operation of the Function Keys on this Programmable LED Indicator

When configuring the 5715 Programmable LED Indicator, users can choose the settings which fit the application. For each menu, there is a scrolling help text which automatically shows in the display. This starts after 5 seconds if the user does not activate a key. Configuration uses the following 3 function keys:

• 1 will increase the numerical value or choose the next parameter
• 2 will decrease the numerical value or choose the previous parameter
• 3 will accept the chosen value and end the menu

If a function does not exist in the display, all parameters will skip to make the configuration as simple as possible. Once user enters the configuration, the display will show “—-“. Pressing and holding “3” will return to the previous menu or return to the default state (1.0) without saving the new values or parameters. If the user doesn’t activate a key for 2 minutes, the display will return to the default state (1.0) without saving the new values or parameters.