OPTIFLUX 2100, Electromagnetic Flowmeter

The OPTIFLUX 2100 is an electromagnetic flowmeter (EMF), or magmeter, for standard water and wastewater applications. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is necessary. Furthermore, installation in measurement chambers subject to (constant) flooding is possible with the remote IP68 / NEMA 6P rated version.

Its wear resistant liner materials, as well as its full bore design without moving parts, make the OPTIFLUX 2100, from KROHNE, an effective replacement of mechanical water meters in drinking water distribution networks. Moreover, this electromagnetic flowmeter features a wide range of approvals necessary for potable water measurement. In addition, a full on-site verification of the meter without process interruption can be carried out using the OPTICHECK service tool.

Features of the OPTIFLUX 2100 Electromagnetic Flowmeter*

• bi-directional flow measurement over a wide dynamic range
• options for subsoil installation and constant flooding
• proven and unsurpassed life time, huge installed base
• standard wet calibration
• PP or hard rubber liner, which is suitable for low concentrated chemicals
• tamper-proof
• standard measurement accuracy: ±0.3% or ±1 mm/s of measured value (MV)
• diagnostic capabilities, for example: conductivity, electrode error, ambient and process temperature, etc.
• full bore design with no moving parts, no wear, and also no pressure loss
• meets potable water standards such as ACS, DVGW, NSF, TZW, WRAS, etc.
• suitable for use in hazardous areas such as ATEX, IECEx, FM, CSA
• on-site verification of flowmeter with OPTICHECK service tool

*Product features and options depend on device configuration. Contact us to make sure that your functionality requirements are available in a single device.

Common Uses of the OPTIFLUX 2100 from KROHNE

• all standard water and wastewater applications
• abstraction and irrigation
• monitoring of distribution networks
• water treatment plants, for example: raw water, drinking water, treatment chemicals, etc.
• wastewater networks
• combined and separate sewage systems and sludge
• storm water overflows (SWOs)
• municipal wastewater treatment plants
• desalination plants: sea water, permeate, and also brine, etc.
• water purification
• leakage detection