CS51 Non-Incendive Low Pressure Transducer, 1-49 PSI
CS51 Non-Incendive Low Pressure Transducer, 1-49 PSI
The CS51 Non-Incendive Low Pressure Transducer is a high strength sensor for low pressure measurements in Class 1, Division 2 hazardous locations. With a wide range of configurable options, this versatile hazardous location pressure transducer is capable of operating in extreme conditions. In addition, the CS51, from Core Sensors, features an all welded stainless steel construction that offers a minimum IP65 rating. It’s an excellent solution for applications such as external fuel tank level measurement, use with process control instrumentation, and for natural gas compression.
- pressures from 1 to 49 PSI
- media isolated
- bi-directional pressure ranges available
- IP65 minimum rated
- approvals and certifications: CSA Class I, Division 2 Groups A,BC,D T4; ABS; CE
Description
The CS51 Non-Incendive Low Pressure Transducer is a high strength sensor for low pressure measurements in Class 1, Division 2 hazardous locations. The CS51 features an all welded stainless steel construction that offers a minimum IP65 rating. A wide range of configurable options make the CS51, from Core Sensors, a versatile hazardous location pressure transducer that’s capable of operating in some of the harshest conditions.
The CS51 is an excellent solution for applications such as natural gas compression, external fuel tank level measurement, and process control instrumentation. Caution must be taken when installing and operating hazardous area instrumentation in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation.
- no conduit installation necessary
- available with a Turck Minifast connection
- CSA Class I, Division 2, Groups A, B, C, D T4 approval
- pressures from 1 to 49 PSI
- see model CS50 for pressures 50 PSI and above
- media isolated
- assembly in New Jersey, USA
CS51 Non-Incendive Low Pressure Transducer
In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS51 Non-Incendive Low Pressure Transducer offers an integral Turck Minifast electrical connection. When combined with a CSA Division 2 approved Turck cordset and a Turck Lokfast Guard, there is no requirement for conduit to be installed over the cable.* This not only makes installation easy but also makes switching out sensors less cumbersome. We can supply all components as a complete package. You can learn more about the Turck Minifast electrical connection here: http://psctexas.com/turck-minifast-connection-for-class-1-div-2-hazardous-areas/
*We recommend confirming hazardous location installation requirements with your local inspector as each installation is unique.
Model Configuration Guide
Approvals and Certifications for this Non-Incendive Low Pressure Transducer
Common Uses of the CS51
- natural gas compression
- vapor recovery
- process controls
