CS54 Non-Incendive Differential Pressure Transducer, 1-50 PSI

The CS54 Non-Incendive Differential Pressure Transducer is a high strength sensor for differential pressure measurements of liquids and gases in Class I, Division 2 hazardous locations. A 316L SS oil filled sensor element provides excellent stability over a wide operating temperature range. In addition, this pressure transducer, from Core Sensors, offers corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1/4″ MNPT or FNPT process connections. Caution must be taken when installing and operating hazardous area pressure sensors in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation.

• no conduit installation necessary
• available with a Turck Minifast connection
• CSA Class I, Division 2, Groups A, B, C, D T4 approval
• differential pressures from 1 to 50 PSI
• line pressures up to 500 PSI
• bi-directional pressure ranges available
• assembly in New Jersey, USA

CS54 Non-Incendive Differential Pressure Sensor

In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS54 Non-Incendive Differential Pressure Transducer offers an integral Turck Minifast electrical connection. When combined with a CSA Division 2 approved Turck cordset and a Turck Lokfast Guard, there is no requirement for conduit to be installed over the cable.* This not only makes installation easy but also makes switching out sensors less cumbersome. We can supply all components as a complete package. You can learn more about the Turck Minifast electrical connection here: psctexas.com/turck-minifast-connection-for-class-1-div-2-hazardous-areas/

*We recommend confirming hazardous location installation requirements with your local inspector as each installation is unique.

Model Configuration Guide

Not all configurations are available. Our sales team can recommend the closest available configuration based on your requirements. Contact us for configurations not shown.

Approvals and Certifications

• CSA Class I, Division 2, Groups A, B, C, D T4
• ABS (American Bureau of Shipping) approval
• CE

Common Uses of the CS54 Non-Incendive Differential Pressure Transducer

• filtration
• cryogenic bulk tank level measurement
• compression systems
• test stands