Stafford, Texas

PR 9113A-EMP mA Temperature Converter

PR 9113A-EMP mA Temperature Converter

  • Input for RTD, TC, and mA
  • Active/passive mA output via the same two terminals
  • 1 or 2 channels
  • EMPHASIS assessed instrument for the nuclear industry
  • SIL 2-certified via Full Assessment

Description

  • Configuration and monitoring by way of detachable display front (PR 4511 / PR 4501); process calibration and signal simulation
  • Copying of the configuration from one device to others of the same type via the display front
  • TC inputs can use either the internal CJC or a terminal with a built-in Pt100 sensor (PR 5910, channel 1 / PR 5913, channel 2) for higher accuracy
  • Advanced monitoring of internal communication and stored data
  • SIL 2 functionality is optional and must be activated in a menu point

Application

  • The device can be mounted in and receive signals from non-classified area and zone 2
  • Conversion and scaling of temperature (Pt, Ni and TC) and active current signals
  • 9113A-EMP has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508
  • Suitable for the use in systems up to Performance Level “d” according to ISO-13849

Technical Characteristics

  • 1 green and 2 red front LEDs indicate operation status and malfunction
  • 2.6 kVAC galvanic isolation between input, output and supply
  • Can be supplied separately or installed on power rail, PR type 9400

Mounting

  • The devices can be mounted vertically or horizontally without distance between neighbouring units