PR 5114B Ex Programmable Transmitter

• The 5114 transmitters can be configured using the PReset software and the Loop Link communications unit.

Using PR electronics Programmable Transmitter

• Jumper selectable inputs for current/voltage or temperature.
• Programmable current (0…100 mA) and voltage (0…250 VDC) inputs.
• Linearized, electronic temperature measurement.
• Conversion of linear resistance variation e.g, from solenoids and butterfly valves or linear movements with attached potentiometer.
• 17.1 VDC loop and 2.5 VDC potentiometer supplies.
• Automatic 4- / 3-wire or programmable 2-wire cable compensation.
• Configurable sensor error detection including NAMUR NE43.

Technical Characteristics

• Active or Passive current output and selectable voltage output.
• Separation of circuits in PELV/SELV installations.
• I.S. barrier for temperature sensors, potentiometers, and current / voltage signals.
• I.S. barrier with I.S. power supply for 2-wire transmitters in zone 0, 1, 2, 20, 21 and 2.