Stafford, Texas

CS82 Intrinsically Safe Submersible Pressure Transducer, 1-50 PSI

CS82 Intrinsically Safe Submersible Pressure Transducer, 1-50 PSI

The CS82 Intrinsically Safe Submersible Pressure Transducer is a high strength sensor designed for liquid level measurements in intrinsically safe locations. The CS82 features stainless steel (316L and 304) construction and an ETFE cable jacket for compatibility with a wide variety of liquids. Precision welds and a high strength Nylon strain relief prevent liquids from entering the transducer while a wide diameter vent tube quickly equalizes the barometric pressure within the sensor body to ensure accurate level measurements. The CS82 is available in various output signals including 4-20mA loop powered for long distance transmissions and voltage outputs for low power and low current consumption applications.

Description

  • Pressures from 1 PSI up to 50 PSI
  • CSA Class I, Division 1, Groups C, D T4 Approved
  • ETFE cable jacket with wide diameter vent tube
  • Nylon strain relief, Buna-N form seal, Viton O-ring
  • Assembled in New Jersey, USA

Applications

  • Fuel tank level measurement
  • Ballast tanks
  • Flood monitoring
  • Depth measurement

Reliable Liquid Level Measurement

The CS82 Intrinsically Safe Submersible Pressure Transducer is certified by CSA to operate safely in Class I, Division 1 Intrinsically Safe rated locations when used with an approved current limiting barrier. This transducer is designed with a high strength 300 series stainless steel (304 & 316L) metallic construction, corrosion resistant ETFE cable jacket, and a Nylon strain relief for compatibility in a wide range of liquids.

The CS82 transducer features a configurable design and can be tailored to your applications operating requirements. The CS82 is offered in a low power configuration, capable of operating from an unregulated power supply of 3-5VDC and consuming 3mA or less of current, which is especially useful when voltage supply is low. We also offer both standard and custom cable lengths to simplify your installation. The standard nose cone can be substituted for 1/4″ or 1/2″ Male NPT threads for threaded installation, commonly where flooding is a concern.