Search
Close this search box.
(281) 491-3833
process-solutions-corp-industrial-instrumentation-distributor-logo

CS11 Compact Media Isolated Pressure Sensor

CS11 Compact Media Isolated Pressure Sensor

The CS11 Compact Media Isolated Pressure Sensor offers a compact design for an economical choice in applications with minimal installation space. It is ideal for pressure ranges from 0-2 up to 2,000 PSI. This pressure sensor features a silicone sensing element with isolation via a fluid filled cavity. Configurations for this pressure transducer, from Core Sensors, are available with a millivolt output signal and 316L SS wetted material for compatibility in a variety of medias.

  • pressures from 0-2 PSI to 2,000 PSI
  • compact design
  • 10 mV/V output signal
  • flush diaphragm available
  • RoHS compliant

Description

The CS11 Compact Media Isolated Pressure Sensor features a silicone sensing element with isolation via a fluid filled cavity. Configurations for this pressure sensor, from Core Sensors, are available with a millivolt output signal and 316L SS wetted material for compatibility in a variety of medias. With available pressure ranges from 0-2 up to 2,000 PSI, and a compact design, the CS11 is an economical choice in applications with minimal installation space.

  • small profile with excellent performance
  • ≤ ±0.25% BFSL accuracy
  • pressures from 0-2 to 2,000 PSI
  • compact design
  • flush diaphragm available

CS11 Compact Media Isolated Pressure Sensor

The CS11 Compact Media Isolated Pressure Sensor is an ideal pressure transducer for applications requiring a small profile with reliable, repeatable performance. Threadless configurations with an O-ring seal are available for easy installation into pressure manifolds. Need a threaded connection? No problem! The CS11 can configure with a threaded process connection such as 1/4″ or 1/8″ Male NPT.

The CS11 not only offers a small profile, but it also offers high performance. Pressure transfers from the 316L SS diaphragm to the sensing element via a fluid filled cavity. This fluid filled design results in a highly stable and fast response pressure measurement over a wide operating temperature range. With its configurable design, this pressure transducer allows broad customization possibilities. Don’t see the configuration you need? Contact us today and let us know your requirements!

Specifications

Performance Thermal Environmental2 Electrical (Millivolt)

Accuracy @ 77˚F (25˚C)1

  • ≤ ±0.25% BFSL
  • ≤ ±0.5% BFSL (2 PSI)

Stability (1 Year)

  • ≤ ±0.25% of FS

Pressure Cycles

  • 10 million

Overpressure

  • 2X minimum

Burst Pressure

  • 5X or 4,000 PSI,
    whichever is less

Operating Temperature

  • -40 to 248˚F
  • -40 to 120˚C

Compensated Temperature

  • 32 to 158˚F
  • 0 to 70˚C

Storage Temperature

  • -40 to 257˚F
  • -40 to 125˚C

TC Zero

  • ≤ ±1.5% of FS

TC Span

  • ≤ ±1.5% of FS

EMI/RFI Protection

  • No

Vibration

  • 10 g, 20 to 2000 Hz

Shock

  • 100 g, 11 msec, 1/2 sine

Outputs

  • 10 mV/V

Excitation

  • 5 VDC typical
  • 10 VDC typical

Current Consumption

  • < 5 mA

Input Impedance

  • 5000 Ohms, typical

Output Impedance

  • 5000 Ohms, typical

Zero Offset (of FS)

  • ≤ ±2%

Span Tolerance (of FS)

  • ≤ ±2%
1Accuracy includes non-linearity, hysteresis and non-repeatability.
2IP Rating is dependent on electrical termination selected. Contact us for more information. IP Rating applies when electrical connector is attached with the appropriate ingress protection.

Model Configuration Guide

CS11-Compact-Media-Isolated-Pressure-Sensor-Core-Sensors-Process-Solutions-Texas-Configurations

Approvals and Certifications

Common Uses of the CS11 Compact Pressure Sensor

  • pressure control panels
  • low pressure monitoring
  • general industrial equipment
  • pressure measurement in confined spaces

Product Documents

industrial-pressure-transducers-core-sensors-quality-pressure-transmitter-process-solutions-corp

Need a Quote?

Let us know and we will contact you shortly.