process-solutions-corp-industrial-instrumentation-distributor-logo

Pressure Transducers

Core Sensors offers highly configurable sensors including pressure transducers, temperature transmitters, and level measurement sensors. Our versatile line of sensors can be modified to ensure survivability and optimal performance in environmental conditions. From factory floors to outdoor equipment, we have the sensors you need.

Industrial Pressure Transducer Sensors
Industrial Pressure Transducers
Industrial Pressure Transducers

Pressure Sensors Built To Last

We manufacture sensors specifically designed to withstand the rugged demands of industrial applications including high vibration, long term submersion, high humidity and high pressure washdowns for both indoor and outdoor applications. Ratings up to IP69K are available.

Industrial pressure transducers are designed to measure the pressure of a liquid or gas within some industry standard operating principle. Core Sensors offers a variety of pressure sensor configurations to meet requirements for a wide range of industrial pressure measurement applications.

The CS10 industrial pressure transducer uses MEMS silicon strain gauges mounted to a stainless steel or nickel alloy sensing element to withstand demanding industrial applications. The ASIC electronics offer analog voltage or 4-20mA loop powered output signals and multiple process connections are available such as 17-4PH, 316L, or nickel alloy including Hastelloy C276 and Inconel 718. Custom design options are available.

DESIGNED FOR

• Water pressure monitoring
• Hydraulic and pneumatic equipment
• HVAC/R controls
• Hydrogen, 316L SS only

FEATURES

• Pressures from vacuum up to 45,000 PSI
• Optional integral snubber
• Reverse polarity and EMI protection
• ≤ ± 0.25% BFSL accuracy

APPROVALS
• CE
• RoHS Compliant

The CS50 pressure transducer is a  high strength sensor designed for use in hazardous areas. The CS50 features an all welded stainless steel construction and a minimum IP65 rating. A wide range of configurable options make the CS50 a versatile pressure transducer designed to operate in some of the harshest conditions.

DESIGNED FOR

• Natural gas compression
• Hydrogen compression and storage, 316L SS only
• Oil exploration
• Process control

FEATURES

• Pressures from 50 PSI up to 30,000 PSI
• One piece design
• Reverse polarity and EMI protection
• ≤ ± 0.25% BFSL accuracy

APPROVALS

• CSA Class I, Division 2, Groups A, B, C, D T4
• ANSI/UL 122701 Single Seal Certified
• American Bureau of Shipping
• CE, RoHS Compliant

The CS51 pressure transducer is a high strength sensor designed for low pressure measurements in Class 1, Division 2 locations and features an all welded stainless steel construction with a minimum IP65 rating. A wide range of configurable options makes this a versatile pressure transducer that can operate in some of the harshest conditions.

DESIGNED FOR

• Natural gas compression
• External fuel tank level measurement
• Vapor recovery
• Process control instrumentation

FEATURES

• Pressures from 1 PSI up to 49 PSI
• Media isolated
• Bi-directional pressure ranges available
• ≤ ± 0.25% BFSL accuracy

APPROVALS

• CSA Class I, Division 2, Groups A, B, C, D T4
• American Bureau of Shipping
• CE
• RoHS Compliant

The CS80 pressure transducer is a high strength sensor designed for use in intrinsically safe areas and features an all welded stainless steel construction for a minimum IP65 rating. This transducer is highly configurable with low power outputs available and can operate off of 3-5VDC of unregulated power to extend battery life in remote applications.

DESIGNED FOR
• Natural gas compression
• Oil exploration
• Process control instrumentation
FEATURES
• Pressures from 50 PSI up to 30,000 PSI
• One piece design
• Reverse polarity and EMI protection
• ≤ ± 0.25% BFSL accuracy
APPROVALS

• CSA Class I, Division 1, Groups C, D T4
• Class I, Zone 0 AEx ia IIB T4 Ga (Ex ia IIB T4 Ga)
• ANSI/UL 122701 Single Seal Certified
• American Bureau of Shipping
• CE and RoHS Compliant

The CS81 pressure transducer is a high strength sensor designed for low pressure measurements in intrinsically safe areas and features an all welded stainless steel construction for a minimum IP65 rating. This transducer is highly configurable and offers low power outputs, which can operate off of 3-5VDC of unregulated power to extend battery life in remote applications.

DESIGNED FOR

• Natural gas compression
• External fuel tank level measurement
• Vapor recovery
• Process control

FEATURES

• Pressures from 1 PSI up to 49 PSI
• Media isolated
• Bi-directional pressure ranges available
• ≤ ± 0.25% BFSL accuracy

APPROVALS

• CSA Class I, Division 1, Groups C, D T4
• Class I, Zone 0 AEx ia IIB T4 Ga (Ex ia IIB T4 Ga)
• American Bureau of Shipping
• CE and RoHS Compliant

The CS14 wet/wet differential pressure transducer features a 316L SS oil filled sensor element that provides excellent stability for a wide operating temperature range while offering corrosion resistance. The compact design makes this transducer ideal for confined spaces and has many configurable options, including differential pressure ranges up to 300 PSI, various voltage and 4-20mA loop powered output signal, and both male and female 1/4″ NPT process connections.

DESIGNED FOR

• Filtration
• Tank level monitoring
• Cryogenic bulk tank level measurement

FEATURES

• Differential pressures up to 300 PSI
• Line pressures up to 500 PSI
• 316L SS diaphragm / oil filled sensor element
• Bi-directional pressure ranges available

APPROVALS

• CE
• RoHS Compliant

The CS54 wet/wet differential pressure transducer is a high strength sensor designed for differential pressure measurements of liquids and gases in hazardous areas. A 316L SS oil filled sensor element provides excellent stability over a wide operating temperature range while offering corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1/4″ MNPT or FNPT process connections.

DESIGNED FOR

• Filtration
• Cryogenic bulk tank level measurement
• Compression systems
• Test stands

FEATURES

• Differential pressures up to 50 PSI
• 316L SS diaphragm / oil filled sensor element
• Bi-directional pressure ranges available

APPROVALS

• CSA Class I, Division 2, Groups A, B, C, D T4
• American Bureau of Shipping
• CE
• RoHS Compliant

The CS84 wet/wet differential pressure transducer is a high strength sensor designed for differential pressure measurements of liquids and gases in intrinsically safe areas up to 50 PSI with 1/4″ MNPT or FNPT process connections. The CS84 features an all welded stainless steel construction for a minimum IP65 rating. A 316L SS oil filled sensor element provides excellent stability over a wide operating temperature range while offering corrosion resistance.

DESIGNED FOR

• Filtration
• External fuel tank monitoring

FEATURES

• Differential pressures up to 50 PSI
• 316L SS diaphragm / oil filled sensor element
• Bi-directional pressure ranges available

APPROVALS

• CSA Class I, Division 1, Groups C, D T4
• Class I, Zone 0 AEx ia IIB T4 Ga (Ex ia IIB T4 Ga)
• American Bureau of Shipping
• CE and RoHS Compliant

Buy Now

Fill out the form below to submit a Request For Quotation (RFQ) and we will reply promptly with a quote. Having trouble? Call (281) 491-3833 today for assistance.

(Video) Installing Core Sensors is Easy!

Installing pressure transducers can be a frustrating experience due to the limited electrical connection options available on the market. A conduit connection with integral cable is a common connection method, however, connecting and routing conduit piping over the instrument cable can be cumbersome. So, Core Sensors is now offering the Turck Mini-Fast integral connector, which allows for quick installation via a threaded connection and does not require the use of conduit. Additionally, the Mini-Fast connector is a high strength, robust connection option offering a minimum IP66 rating.