Instrumentation for Boiler Repair

Boilers provide a critical source of heat for many applications, from warming large office buildings and universities, to steam cleaning laundry and linens for hospitals, or use in many industrial and commercial, and more.

Built for longevity and accuracy, this oxygen detector uses non-consumable paramagnetic technology to detect oxygen, offering an alternative to oxygen detectors that use fuel cells, which deplete over time. Using a paramagnetic oxygen detector will virtually eliminate routine maintenance and calibrations in exchange for increased safety, reliability, and lower cost of ownership.

Oxygen Monitoring Device

• industry leading linearity and accuracy
• non-depleting paramagnetic sensor
• no cell replacement required
• quality equipment at a low cost to own
• internal orientation compensation
• fault alarm via mA jam to 0mA
• remote interface, live monitoring
• fast adjustable response and operating parameters
• easy integration via isolated 4-20mA output with linear measurement

All-in-One Oxygen Detector

Paramagnetic Oxygen Detector

Winter is the worst time to replace boiler instrumentation! This quality pressure transducer is made of stainless steel and is designed for OEMs that use frequency input. The output signal for this PT is a frequency modulated square wave set from 1 kHz to 6 kHz.
• made in USA by Core Sensors
• corrosion resistant
• 1 kHz to 6 kHz span
paramagnetic-oxygen-sensor-paracube

How a Paramagnetic Oxygen Detector Works

Alternative to Fuel Cell Oxygen Detectors

Built for longeveity and accuracy, our oxygen detector is equipped with a Paracube® oxygen sensor, which uses non-consumable paramagnetic technology to detect oxygen. Paramagnetic sensors rely on weak magnetic forces to detect the concentration of oxygen in the surrounding atmosphere.

Paramagnetic Sensors Reduce Downtown

Paramagnetic oxygen sensors are a low-maintenance, non-consumable alternative to traditional oxygen detectors and do not rely on electrochemical, galvanic, or fuel cells. Since paramagnetic oxygen detectors do not require fuel cells, routine maintenance, labor, parts costs, and calibrations are significantly reduced in exchange for increased safety and reliability.

Paracube® Micro Oxygen Sensor Module

Oxygen Detector Equipped with Paramagnetic Sensor

Offering industry-leading linearity, accuracy, and reliability, the paramagnetic sensor used in this oxygen detector does not deteriorate, so regular replacement and calibration is eliminated. This new technology ensures unprecedented levels of safety and performance while reducing cost of lifetime ownership.
• Range: 0-25% O2
• Linearity: less than ± 0.2% O2
• Repeatability: less than ± 0.3% O2
paramagnetic oxygen detector

Next Generation Oxygen Detection

Paramagnetic Oxygen Detectors Improve Safety

Our paramagnetic sensor offers innovative life-safety performance and eliminates false readings and false alarms caused by depleting cells in traditional oxygen detector technologies. Advanced Magneto-Dynamic technology offers unprecedented performance and reliability, and the microprocessor based diagnostics are safe, reliable, and easy to access.
• RoHS, IEC 61010-1 compliant
• CE compliance with Low Voltage, EMC and applicable directives
• SIL 2 hardware compliance for safety systems
• meets IP66 enclosure rating for indoor use
• hazardous area configuration suitable for ATEX Cat 3, IECEx Zone 2, North American Class 1, Div 2
Place Holder

Technical Overview

Oxygen Detector Specifications

• suitable for indoor use for temperatures from 41˚F to 113˚F
• light wall-mountable design for easy installation
• output range of 0-25% O2
• ethernet or Modbus TCP
• 2 x SPCO relays, alarm 1, alarm 2, fault

Using Oxygen Detectors

Oxygen Depletion Detection

Since oxygen detectors are used to measure available oxygen in the atmosphere and ensure there’s enough breathable oxygen to survive, they are commonly found in laboratories, gas processing and blending facilities, hospital ventilators, NICU incubators, and other life critical, or confined space environments.

Life Critical Environments

• air separation units and inert gas production, storage, and use such as helium, nitrogen, etc.
• pharmaceutical plants and semiconductor facilities
• laboratories, research institutions, and universities
• industrial gas plants, processors, blending, and storage facilities
• enclosed areas especially petrochemical plants and refineries
• hospitals and medical care facilities
Place Holder

(Video) Paracube Paramagnetic Oxygen Sensor Overview

Next Generation Oxygen Detection

The Paracube Micro offers world-leading oxygen sensing performance by combining leading paramagnetic technologies with cutting-edge design and manufacturing techniques. Delivering outstanding performance from a new compact unit, the Micro’s ‘next-generation’ design ethos offers a degree of system integration, flexibility, compliance, and reliability currently unrivalled in the OEM oxygen sensor market.