Hydrogen gas presents difficulties when it comes to pressure sensors that needs to be considered when selecting the correct sensor configuration. Two of the most common sensor concerns in Hydrogen applications are hydrogen embrittlement and hydrogen permeation.
Wastewater lift stations, or pumping stations, are an integral part in the transportation and eventual treatment of wastewater and other used water. Wastewater is commonly transported through piping systems, using gravity to move the water from one location to another. Using gravity helps keep costs down during transportation. However, gravity
In a compound pressure transducer, the sensor is zero-referenced to atmospheric pressure. In other words, the transducer has been calibrated to provide the zero-pressure output value at full vacuum range of -14.7 PSI (or -1 bar). Typically this is offered for low and medium pressure range, gauge referenced transducers (vented
Core Sensors focuses broadly on sensors for industrial, hydrogen, energy, and other fluid and gas process applications. While sensors can be a commodity product, their honest and responsive customer service values sets them apart. Our team will work with you to find the right solution from our in-house design and
Core Sensors offers a variety of high quality bi-directional pressure transducers for use in low pressure vapor recovery operations. Unlike a unidirectional pressure transducer that can measure pressures from zero to a defined positive pressure (i.e. 0 to 70mBar), bi-directional pressure transducers measure both positive and negative pressure (i.e. -70mBar
A common concern when selecting a pressure transducer is the performance in various temperature conditions. Temperature is an important specification, as it has a direct effect on the accuracy of the transducer. Significant errors in the pressure readings or complete failure of the transducer are possible if installed in an
Hazardous Location Pressure Transducers Hazardous location pressure transducers are used in areas that require third party certifications to ensure that the sensor can operate safely. Core Sensors offers non-incendive and intrinsically safe pressure transducers certified by CSA. ANSI/UL 122701 Single Seal is available on select sensors for Canadian installations. These
Pressure Transducers In a compound pressure transducer, the sensor is zero-referenced to atmospheric pressure. In other words, the transducer has been calibrated to provide the zero-pressure output value at full vacuum range of -14.7 PSI (or -1 bar). Typically this is offered for low and medium pressure range, gauge referenced
Pressure Transducers for Vapor Recovery Core Sensors offers a variety of high quality bi-directional pressure transducers for use in low pressure vapor recovery operations. Unlike a unidirectional pressure transducer that can measure pressures from zero ti a defined positive pressure (i.e. 0 to 70mBar), bi-directional pressure transducers measure both positive
Copyright 2022 © All Rights Reserved Worldwide
